User Tools

Site Tools


super:technical_information:data_structures

Room header

 ____________________________________ Room index
|   _________________________________ Area index
|  |   ______________________________ X position (of top left corner) on the map
|  |  |   ___________________________ Y position (of top left corner) on the map
|  |  |  |   ________________________ Room width (in units of screens = 16 blocks = 256 pixels)
|  |  |  |  |   _____________________ Room height (in units of screens = 16 blocks = 256 pixels)
|  |  |  |  |  |   __________________ Up scroller
|  |  |  |  |  |  |   _______________ Down scroller
|  |  |  |  |  |  |  |   ____________ CRE bitset
|  |  |  |  |  |  |  |  |   _________ Door list pointer
|  |  |  |  |  |  |  |  |  |     ____ State conditions list
|  |  |  |  |  |  |  |  |  |    |
|  |  |  |  |  |  |  |  |  |    |
ii aa xx yy ww hh uu dd cc dddd [...]

Room headers define rooms, they exist in bank $8F and room header pointers are what SMILE displays as a dropdown box for room selection. They are variable length (due to the event header list) with E5E6 as a terminator.

The state conditions list defines conditions to load alternative state headers, they are checked in order and the first state condition whose check passes determines the state header to load. Due to this, state conditions must be specified in backwards chronological order.

Area indices

Area indices

0 Crateria
1 Brinstar
2 Norfair
3 Wrecked Ship
4 Maridia
5 Tourian
6 Ceres
7 Debug

 

Notes:

  • The room index is almost unused, aside from some specific checks to do with atmospheric graphics in some areas.
  • The room width may not exceed 15 due to the way block collision calculations are implemented
  • Room width * room height may not exceed 50 due to memory constraints
  • The up scroller defines the threshold Y position that Samus needs to exceed (relative to the screen) for the screen to start scrolling downwards when the camera is at the top of the room
  • The down scroller defines the threshold Y position that Samus needs to exceed (relative to the screen) for the screen to start scrolling upwards when the camera is at the bottom of the room
  • The CRE bitset defines some flags that affect how the CRE is loaded during door transitions:
1 Disable layer 1 during door transitions into and out of the room
2 Reload the CRE
4 Load extra large tileset

State conditions list

 ______________ State condition
|     _________ State condition parameters
|    |      ___ State header pointer
|    |     |
eeee [...] ssss ; First state condition
eeee [...] ssss ; Second state condition
[...]           ; Other state conditions
E5E6            ; Default state condition (terminator)

State conditions are two-byte pointers to code in bank $8F that may have parameters. If the check defined in the state conditions is passed, the state header pointer in that state condition header is used to load the room. The only exception is state condition $E5E6, the default, which doesn't have a state header pointer (the default state header simply follows this state condition header instead).

List of state conditions used in Super Metroid

List of state conditions used in Super Metroid

Condition Parameters Description
$E5E6 Default
$E5EB dddd Check passes if the current door pointer = d
$E5FF Check passes if main area boss is dead
$E612 ee Check passes if event e is set
$E629 bb Check passes if area boss b is dead
$E640 Check passes if morph ball has been collected
$E652 Check passes if morph ball and missiles have been collected
$E669 Check passes if power bombs have been collected
$E678 Check passes if speed booster has been collected

Event numbers are given as follows:

0 Zebes is awake
1 Shitroid ate sidehopper
2 Mother Brain's glass is broken
3 Zebetite 1 is destroyed
4 Zebetite 2 is destroyed
5 Zebetite 3 is destroyed
6 Phantoon statue is grey
7 Ridley statue is grey
8 Draygon statue is grey
9 Kraid statue is grey
Ah Entrance to Tourian is unlocked
Bh Maridia noobtube is broken
Ch Lower Norfair chozo has lowered the acid
Dh Shaktool cleared a path
Eh Zebes timebomb set
Fh Critters escaped
10h 1st Metroid hall cleared
11h 1st Metroid shaft cleared
12h 2nd Metroid hall cleared
13h 2nd Metroid shaft cleared
14h Unused
15h Outran speed booster lavaquake

Boss bits are given as follows:

1 Area boss (Kraid, Phantoon, Draygon, both Ridleys)
2 Area mini-boss (Spore Spawn, Botwoon, Crocomire, Mother Brain)
4 Area torizo (Bomb Torizo, Golden Torizo)

 

Door list

 _________________ First door pointer (door BTS 0)
|     ____________ Second door pointer (door BTS 1)
|    |     _______ Other door pointers (door BTS 2+)
|    |    |
aaaa bbbb [...]

Door lists are a list of door pointers that can be used in a room, they exist in bank $8F. They are variable length with no terminator, and are indexed by door BTS (thus, there is an effective maximum of 128 door pointers).

The door pointers themselves are two-byte pointers to door headers in bank $83.

Door header

 _____________________________ Destination room header pointer (bank $8F)
|     ________________________ Elevator properties
|    |   _____________________ Direction
|    |  |   __________________ Doorcap X position in blocks
|    |  |  |   _______________ Doorcap Y position in blocks
|    |  |  |  |   ____________ X screen
|    |  |  |  |  |   _________ Y screen
|    |  |  |  |  |  |   ______ Distance from door to spawn Samus
|    |  |  |  |  |  |  |     _ Custom door ASM to execute (bank $8F)
|    |  |  |  |  |  |  |    |
rrrr ee oo xx yy XX YY dddd aaaa

Door headers define doors, they exist in bank $83 and have a fixed length of 12 bytes. The door ASM can execute any arbitrary ASM and is often used to set scroll values for the new room where the door would normally be hidden inside a red scroll. If the distance from door to spawn Samus is negative (8000h..FFFFh), the standard value of 0x00C8 is used for horizontal doors or 0x0180 for vertical doors.

The elevator properties are as follows:

0x80 Door is an elevator
0x40 Switch map to new area
0x0i Marks elevator index i as used (for debug mode)

The orientation values are as follows:

0 Right
1 Left
2 Down
3 Up
4+ Door spawns a closing door cap

State header

 _______________________________________________________________ Level data
|       ________________________________________________________ Tileset
|      |   _____________________________________________________ Music data index
|      |  |   __________________________________________________ Music track
|      |  |  |   _______________________________________________ FX ($83)
|      |  |  |  |     __________________________________________ Enemy population ($A1)
|      |  |  |  |    |     _____________________________________ Enemy set ($B4)
|      |  |  |  |    |    |     ________________________________ Layer 2 scroll X
|      |  |  |  |    |    |    |   _____________________________ Layer 2 scroll Y
|      |  |  |  |    |    |    |  |   __________________________ Scroll
|      |  |  |  |    |    |    |  |  |     _____________________ Special x-ray blocks
|      |  |  |  |    |    |    |  |  |    |     ________________ Main ASM (FX2 in old SMILE)
|      |  |  |  |    |    |    |  |  |    |    |     ___________ PLM population
|      |  |  |  |    |    |    |  |  |    |    |    |     ______ Library background
|      |  |  |  |    |    |    |  |  |    |    |    |    |     _ Setup ASM (Layer1_2 in old SMILE)
|      |  |  |  |    |    |    |  |  |    |    |    |    |    |
llllll tt MM mm ffff eeee EEEE xx yy ssss xxxx AAAA pppp bbbb aaaa

State headers define the parts of rooms that can change due to different events.

Tilesets

Tilesets

0 Upper Crateria
1 Red Crateria
2 Lower Crateria
3 Old Tourian
4 Wrecked Ship - power on
5 Wrecked Ship - power off
6 Green/blue Brinstar
7 Red Brinstar / Kraid's lair
8 Pre Tourian entrance corridor
9 Heated Norfair
Ah Unheated Norfair
Bh Sandless Maridia
Ch Sandy Maridia
Dh Tourian
Eh Mother Brain's room
Fh Blue Ceres
10h White Ceres
11h Blue Ceres elevator
12h White Ceres elevator
13h Blue Ceres Ridley's room
14h White Ceres Ridley's room
15h Map room / Tourian entrance
16h Wrecked Ship map room - power off
17h Blue refill room
18h Yellow refill room
19h Save room
1Ah Kraid's room
1Bh Crocomire's room
1Ch Draygon's room

Music data indices

Music data indices

0 No change
3 Title sequence
6 Empty Crateria
9 Lower Crateria
Ch Upper Crateria
Fh Green Brinstar
12h Red Brinstar
15h Upper Norfair
18h Lower Norfair
1Bh Maridia
1Eh Tourian
21h Mother Brain
24h Boss fight 1
27h Boss fight 2
2Ah Miniboss fight
2Dh Ceres
30h Wrecked Ship
33h Zebes boom
36h Intro
39h Death
3Ch Credits
3Fh “The last Metroid is in captivity”
42h “The galaxy is at peace”
45h Shitroid (same as boss fight 2)
48h Samus theme (same as upper Crateria)

Music track values

Music track values

0 No change
1 Samus fanfare
2 Item fanfare
3 Elevator
4 Pre-statue hall
5 Song 0
6 Song 1
7 Song 2

 

Notes:

  • Level data is a three-byte pointer to compressed data defining the placement of layer 1 tiles, block properties (including BTS) and optionally custom layer 2 tile placement
  • The tileset is an index into a table that defines the tile table, tile graphics and palette
  • The music data index is an index into a music pointers that define songs 0, 1 and 2
  • The FX is an (optional) pointer to data defining graphical effects such as animated tiles, palette glows and layer 3 (e.g. water, lava, spores)
  • The enemy population is a pointer to data defining enemy placement and other parameters
  • The enemy set is a pointer to data defining which enemies use which palettes
  • The layer 2 scroll X/Y is a value that determines whether or not custom layer 2 is used, and how fast layer 2 scrolls compared to layer 1 (parallax effect)
    • In binary, let layer 2 scroll X/Y = sssssssb
    • If b = 1, then the library background is used, otherwise custom layer 2 (defined in level data) is used
    • s = 0 is a special case that depends on b
      • If b = 0 (custom layer 2), then layer 2 and layer 1 scroll together at the same speed (like an extension of layer 1)
      • If b = 1 (library background), then layer 2 does not scroll at all (static image background)
    • Otherwise (if s != 0), layer 2 scroll speed = (layer 1 scroll speed) * (s / 0x80)
  • The scroll is an (optional) pointer to data defining which 16×16 regions are scrollable
    • If scroll = 0, then every scroll region is set to green, except for the bottom row, which is set to blue
    • If scroll = 1, then every scroll region is set to green
  • The special x-ray blocks is an (optional) pointer to data defining custom x-ray block graphics
  • The main ASM is an (optional) pointer to code run every frame
  • The PLM population is an (optional) pointer to data defining PLM placement and parameters
  • The library background is an (optional) pointer to data defining operations for loading layer 2
  • The setup ASM is an (optional) pointer to code run upon loading the room

Level data

ssssssssssssssss ; Size of decompressed layer 1 data (2 x the number of blocks)

 _______ Block type
|    ___ Y flip
|   | __ X flip
|   || _ Block number
|   |||
ttttyxnnnnnnnnnn ; First block
ttttyxnnnnnnnnnn ; Second block
[...]            ; Other blocks

bbbbbbbb         ; First block BTS
bbbbbbbb         ; Second block BTS
[...]

Optional:
0000yxnnnnnnnnnn ; First block layer 2
0000yxnnnnnnnnnn ; Second block layer 2
[...]            ; Other blocks layer 2

Level data is defined by specifying data for each 16px x 16px block in the room. This data is split into layer 1 blocks, BTS and optionally layer 2 blocks. Layer 1/2 are two bytes per block, BTS is one byte per block, and a two byte “decompressed layer 1” size. The decompressed size is followed by layer 1 data, followed by BTS, followed by layer 2 (if used) in that order. Level data is compressed in ROM.

Layer 1 blocks uses the binary format shown above where:

  • Block type specifies the primary type of the block
  • X/Y flip flips the graphics of the block
  • Block number specifies the index of the block into the tile table (provides the graphics of the block)

Layer 2 blocks use the same format, except that they have no block type (they are padded with zeros instead).

BTS data further specifies the type of a block, depending on the primary block type used, e.g. different slope types.

Block types and BTS values

Block types and BTS values

Air types Solid types
0 Air 8 Solid block
1 Slope 9 Door block
2 Spike air Ah Spike block
3 Special air Bh Special block
4 Shootable air Ch Shootable block
5 Horizontal extension Dh Vertical extension
6 Unused air Eh Grapple block
7 Bombable air Fh Bombable block
Block type BTS Description
2 / Ah Spike 0 Solid only. Generic spike (60 damage)
1 Solid only. Kraid's lair spike (10h damage)
2 Air only. Air spike (10h damage)
3 Solid only. Draygon's broken turret (10h damage)
Eh Solid only. X-rayable block (used in Blue Brinstar boulder room)
Fh Solid only. Enemy breakable block (used in Shaktool's room)
3 / Bh Special 0 1×1 respawning crumble block
1 2×1 respawning crumble block
2 1×2 respawning crumble block
3 2×2 respawning crumble block
4 1×1 crumble block
5 2×1 crumble block
6 1×2 crumble block
7 2×2 crumble block
8 Air only. Rightwards treadmill, disabled in Wrecked Ship unless Phantoon is dead
9 Air only. Leftwards treadmill, disabled in Wrecked Ship unless Phantoon is dead
Ah Air only. Rightwards treadmill, always on
Bh Air only. Leftwards treadmill, always on
Eh Respawning speed boost block
Fh Speed boost block
44h Generic PLM shot trigger
45h Item collision detection
46h Scroll PLM trigger
47h Map station right access
48h Map station left access
49h Energy station right access
4Ah Energy station left access
4Bh Missile station right access
4Ch Missile station left access
4Dh Save station trigger
Crateria/debug 80h Air only. Ice physics
Brinstar 80h Floor plant
81h Ceiling plant
82h Respawning speed block, slower crumble animation
83h Speed block, slower crumble animation
84h Respawning speed block (used by dachora pit)
85h Speed boost block
Norfair 83h Lower Norfair chozo hand trigger
Wrecked Ship 80h Wrecked Ship chozo hand trigger
Maridia 80h Quicksand surface, can run on without sinking (used in snail room)
81h Quicksand surface
82h Quicksand surface
83h Submerging quicksand (used in sand falls rooms)
84h Sand falls - slow. Used in the ceilings of pre-Draygon mochtroid rooms (so basically unused)
85h Sand falls - fast
7 / Fh Bombable 0 1×1 respawning bomb block
1 2×1 respawning bomb block
2 1×2 respawning bomb block
3 2×2 respawning bomb block
4 1×1 bomb block
5 2×1 bomb block
6 1×2 bomb block
7 2×2 bomb block
4 / Ch Shootable 0 1×1 respawning shot block
1 2×1 respawning shot block
2 1×2 respawning shot block
3 2×2 respawning shot block
4 1×1 shot block
5 2×1 shot block
6 1×2 shot block
7 2×2 shot block
8 Respawning power bomb block
9 Power bomb block
Ah Respawning super missile block
Bh Super missile block
Ch Fake super missile block (solid block but shows super missile block when x-rayed)
Dh Fake super missile block
Eh Fake super missile block
Fh Fake super missile block
10h Gate blocks
40h Blue door facing left
41h Blue door facing right
42h Blue door facing up
43h Blue door facing down
44h Generic shot trigger
45h Item trigger
46h Left blue gate trigger
47h Right blue gate trigger
48h Left red gate trigger
49h Right red gate trigger
4Ah Left green gate trigger
4Bh Right green gate trigger
4Ch Left orange gate trigger
4Dh Right orange gate trigger
4Fh Critters escape block
Eh Grapple block 0 Generic grapple block
1 Respawning crumbling grapple block
2 Non-respawning crumbling grapple block
80h+ Grapple-through block

 

FX

 __________________________________________ Door pointer
|     _____________________________________ Base Y position
|    |     ________________________________ Target Y position
|    |    |     ___________________________ Y velocity
|    |    |    |     ______________________ Timer
|    |    |    |    |   ___________________ Layer 3 type
|    |    |    |    |  |   ________________ Default layer blending configuration (FX A)
|    |    |    |    |  |  |   _____________ FX layer 3 layer blending configuration (FX B)
|    |    |    |    |  |  |  |   __________ Liquid options (FX C)
|    |    |    |    |  |  |  |  |   _______ Palette FX bitset
|    |    |    |    |  |  |  |  |  |   ____ Animated tiles bitset
|    |    |    |    |  |  |  |  |  |  |   _ Palette blend
|    |    |    |    |  |  |  |  |  |  |  |
dddd,bbbb,tttt,vvvv,tt,ff,AA,BB,CC,pp,aa,bb ; First FX entry
dddd,bbbb,tttt,vvvv,tt,ff,AA,BB,CC,pp,aa,bb ; Second FX entry
[...]                                       ; Other FX entries
0000,bbbb,tttt,vvvv,tt,ff,AA,BB,CC,pp,aa,bb ; Default FX entry

OR

FFFF ; No FX

FX defines roomwide graphical effects, they're stored in bank $83. A room either has a two byte FFFF entry specifying there is no FX, or it has optional door-dependent FX entries followed by the default entry. A door-dependent FX entries is used if the door taken into the room matches the entry's door pointer, if no doors match (or if there are no entries) the default entry is used.

Layer 3 types

Layer 3 types

0 None
2 Lava
4 Acid
6 Water
8 Spores
Ah Rain
Ch Fog
20h Scrolling sky
22h Unused
24h Fireflea
26h Tourian entrance statue
28h Ceres Ridley
2Ah Ceres elevator
2Ch Haze

Layer blending configurations

Layer blending configurations

2/Eh/20h Normal. BG1/BG2/sprites are drawn with BG3 added on top
4 Normal, but BG2 is disabled Used by Phantoon
6 Normal, but sprites aren't affected by BG3 and sprites are added to BG1/BG2 (instead of hidden) Unused
8 Normal, but BG1/sprites aren't affected by BG3 and sprites are added to BG2 (instead of hidden) Used in some power off Wrecked Ship rooms
Ah Normal, but BG1 isn't affected by BG3 Used with FX layer 3 type = spores
Ch Normal, but BG3 is disabled and colour math is subtractive Used with FX layer 3 type = fireflea
10h/12h Normal, but BG3 is disabled inside window 1 Used by morph ball eye and varia/gravity suit pickup
14h/22h Normal, but BG1 isn't affected by BG3 and colour math is subtractive Sometimes use with FX layer 3 type = water
16h BG1/sprites are drawn after the result of drawing BG2/BG3 is subtracted Sometimes use with FX layer 3 type = water
18h/1Eh/30h BG3 is drawn with the result of drawing BG1/BG2/sprites added on top Used with FX layer 3 type = lava / acid / fog / Tourian entrance statue, sometimes use with FX layer 3 type = water
1Ah Normal, but BG2 and BG3 have reversed roles Used by Phantoon
1Ch Normal, but BG2 and BG3 have reversed roles, colour addition is halved and backdrop is disabled Unused
24h BG1/BG2/sprites are drawn the backdrop is added on top inside window 1 Used by Mother Brain
26h Normal, but colour addition is halved Unused
28h Normal, but BG3 is disabled, colour math is subtractive, and the backdrop subtracts red if there is no power bomb explosion Used in some default state Crateria rooms, some power off Wrecked Ship rooms, pre plasma beam rooms
2Ah Normal, but BG3 is disabled, colour math is subtractive, and the backdrop subtracts orange if there is no power bomb explosion Used in blue Brinstar rooms, Kraid's lair entrance, n00b tube side rooms, plasma beam room, some sand falls rooms
2Ch Normal, but BG3 is disabled Used by FX layer 3 type = haze and torizos
2Eh Normal, but colour math is subtractive Unused
32h Normal, but BG1 isn't affected by BG3 and colour math is subtractive Unused
34h Normal, but power bombs don't affect BG2 Unused

Liquid options

Liquid options

1 Liquid flows (leftwards)
2 Layer 2 is wavy
4 Liquid physics are disabled (used in n00b tube room)
40h Big tide (liquid fluctuates up and down, a la the gauntlet)
80h Small tide (liquid fluctuates up and down)

 

Enemy population

 ____________________________________ Enemy ID
|     _______________________________ X position
|    |     __________________________ Y position
|    |    |     _____________________ Initialisation parameter (orientation in old SMILE, tilemaps in SMILE RF)
|    |    |    |     ________________ Properties (special in SMILE)
|    |    |    |    |     ___________ Extra properties (special GFX bitset in SMILE, graphics in SMILE RF)
|    |    |    |    |    |     ______ General purpose parameter (speed in SMILE)
|    |    |    |    |    |    |     _ General purpose parameter (speed 2 in SMILE)
|    |    |    |    |    |    |    |
iiii xxxx yyyy oooo pppp gggg aaaa bbbb ; First enemy
iiii xxxx yyyy oooo pppp gggg aaaa bbbb ; Second enemy
[...]                                   ; Other enemies
FFFF                                    ; Terminator
nn                                      ; Number of enemy deaths needed to clear current room

Enemy population defines the placement of enemies, as well as some generic and enemy specific properties. They're stored in bank $A1 with each enemy being 16 bytes, plus a 3 byte overhead. The initialisation parameter is overwritten by generic enemy routines and so is often only used during enemy initialisation, the other two general purpose parameters do not have this restriction.

The properties are as follows:

8000h Hitbox solid to Samus
4000h Respawns if killed
2000h Process instructions
1000h Block plasma beam
800h Process whilst off-screen
400h Intangible
200h Delete
100h Invisible

The extra properties are as follows:

4 Enable extended spritemap format
1 Disable enemy AI. Isn't disabled if intangible

Enemy set

 ______ Enemy ID
|     _ Palette index
|    |
iiii pppp ; First enemy
iiii pppp ; Second enemy
[...]     ; Other enemies
FFFF      ; Terminator

Enemy set defines which enemies are allowed inside the room and which palette slot to use. They're stored in bank $B4 with each enemy being 4 bytes, plus the 2 byte terminator. Enemies that use the same palette may share the same palette index. Valid palette indices are 1, 2, 3 and 7; note that only palette 7 is affected by colour math.

Scroll

 _______ First scroll
|   ____ Second scroll
|  |   _ Other scrolls
|  |  |
aa bb [...]

Scrolls define how the camera works for each 16×16 block (256px x 256px) area in left-to-right, top-down order (reading order). They're stored in bank $8F and are one byte per scroll.

Scroll values are as follows:

0 Red. Cannot scroll into this area
1 Blue. Hides the bottom 2 rows of the area
2 Green. Unrestricted

Special x-ray blocks

 _______ X position
|   ____ Y position
|  |   _ Block
|  |  |
xx yy nnnn ; First x-ray block
xx yy nnnn ; Second x-ray block
[...]      ; Other x-ray blocks
0000       ; Terminator

Special x-ray blocks display custom x-ray graphics for blocks at given positions in the room. They're stored in bank $8F with each block being 4 bytes, plus the 2 byte terminator.

Special x-ray blocks are used in exactly one place in vanilla Super Metroid: the Bomb Torizo room during the escape sequence. It's a hacky way of allowing Samus to x-ray the shootable block in the bottom-right corner of the screen. Note that even after you've shot the shootable block, x-ray will still show the shootable block graphics.

The X/Y position is specified in (16px x 16px) block units. The block uses the level data block format, except that the block type is ignored.

Note that flexglow uses this pointer for the flexglow table instead.

PLM population

 ____________ PLM ID
|     _______ X position
|    |   ____ Y position
|    |  |   _ Parameter
|    |  |  |
iiii xx yy pppp ; First PLM
iiii xx yy pppp ; Second PLM
[...]           ; Other PLMs
0000            ; Terminator

PLM population defines the placement of PLMs, as well as some PLM specific properties. They're stored in bank $8F with each PLM being 6 bytes, plus the 2 byte terminator.

PLMs with PLM ID >= $DF89 are considered to be “item PLMs”, meaning the PLM argument specified in the PLM populations will be used as a unique ID and cannot be negative.

Library background

 ______ Type
|     _ Parameters
|    |
tttt [...] ; First background command
tttt [...] ; Second background command
[...]      ; Other background commands
0000       ; Terminator

The list of commands used in Super Metroid is as follows:

Type Parameters Description
2 ssssss dddd nnnn Transfer n bytes from s to d in VRAM
4 ssssss dddd Decompress s to d in bank $7E
6 Clear layer 3
8 ssssss dddd nnnn Transfer n bytes from s to d in VRAM and set BG3 tiles base address = $2000
Ah Clear layer 2
Ch Clear Kraid's layer 2
Eh DDDD ssssss dddd nnnn Transfer n bytes from s to d in VRAM if the current door pointer = D

Object formats

Super Metroid has lots of specialised object formats, which are defined with an instruction list possibly combined with an “initialisation ASM”. In general, object formats have a handler that, for each object, executes a pre-instruction and then interprets the instruction list.

The instruction list is a list of ASM instructions and special instructions. ASM instructions have a negative value (meaning $8000..FFFF), which is a pointer to a function to be executed, followed by any parameter values that the function requires. Special instructions (usually graphical in nature) have a positive value (meaning $0000..7FFF), usually a timer value, followed by any parameter values.

Common ASM instructions include looping, conditional execution, setting the pre-instruction, deleting the object and sleeping. The pre-instruction is a function that's executed before the object's instruction list is processed for the current frame. Objects that are sleeping are suspended from handling until they are awakened (usually by a pre-instruction set earlier in the object instruction list).

PLMs

PLMs (post-load modifications) are objects that modify level data blocks in real-time. They exist in bank $84 and are typically loaded with a room from a room header (e.g. items, doors) or spawned as part of a block interaction (e.g. shot block crumbling).

PLM header:

 ______ Initialisation ASM pointer
|     _ Instruction list pointer
|    |
aaaa iiii

Door PLM header:

 ___________ Initialisation ASM pointer
|     ______ Instruction list pointer
|    |     _ Instruction list pointer - door closing
|    |    |
aaaa iiii dddd

The third pointer for door PLMs is used instead of the second pointer when the PLM is placed where a blue door would normally be closing when Samus enters a room.

The special instructions for PLMs have the format:

 ______ Draw timer
|     _ Pointer to draw instruction
|    |
tttt dddd

The draw timer is how many frames to wait until the next instruction in the instruction list is proceeded to.

The draw instruction format is a list of:

nnnn       ; Number of blocks
bbbb [...] ; Blocks
xx yy      ; X and Y offsets from origin to start drawing from

where the list is terminated by xx yy = 00 00.

Blocks are drawn from the PLM's position, the direction they're drawn in is given by the most significant bit of n. If n < 8000h, the blocks are drawn in a horizontal line to the right. If n >= 8000h, n & 7FFFh blocks are drawn in a vertical line downwards.

Enemy projectiles

Enemy projectiles exist in bank $86 and are typically spawned by enemies and can use their graphics and palette.

Enemy projectile header:

 __________________________________ Initialisation AI
|     _____________________________ (Initial) pre-instruction
|    |     ________________________ Instruction list pointer
|    |    |     ___________________ X radius
|    |    |    |   ________________ Y radius
|    |    |    |  |   _____________ Damage/properties
|    |    |    |  |  |     ________ Touch AI
|    |    |    |  |  |    |     ___ Shot AI
|    |    |    |  |  |    |    |
iiii pppp IIII xx yy Pddd tttt ssss

The properties are as follows:

8000h Detect collisions with projectiles
4000h Don't die on contact
2000h Disable collisions with Samus
1000h Low priority (drawn under enemies/Samus/projectiles)

The special instructions for enemy projectiles have the format:

 ______ Spritemap timer
|     _ Pointer to spritemap
|    |
tttt ssss

The spritemap timer is how many frames to wait until the next instruction in the instruction list is proceeded to. Within the spritemap, the tile numbers added to the base tile number set when the enemy projectile was spawned (so the projectile can access enemy graphics).

Animated tiles objects

Animated tiles objects are objects that modify tile graphics in real-time. They exist in bank $87 and are loaded with a room from an FX header.

Animated tiles object header format:

 ___________ Instruction list pointer
|     ______ Size
|    |     _ VRAM address
|    |    |
iiii ssss vvvv

The special instructions for animated tiles objects have the format:

 ______ Animation timer
|     _ Pointer to tile graphics
|    |
tttt ssss

The animation timer is how many frames to wait until the next instruction in the instruction list is proceeded to.

HDMA objects

HDMA objects exist in bank $88 and are typically loaded with a room as part of FX or spawned by power bombs / x-ray.

HDMA object header format:

 _______ HDMA options
|   ____ PPU register index
|  |   _ Instruction list pointer
|  |  |
dd pp iiii

The special instructions for HDMA objects have the format:

 ______ Table timer
|     _ Pointer to HDMA table
|    |
tttt ssss

The table timer is how many frames to wait until the next instruction in the instruction list is proceeded to.

Palette FX objects

Palette FX objects are objects that modify palette data in real-time. They exist in bank $8D and are loaded with a room from an FX header.

Palette FX object header format:

 ______ Initialisation ASM pointer
|     _ Instruction list pointer
|    |
aaaa iiii

The special instructions for palette FX objects have the format:

 ______ Palette timer
|     _ Palette instruction list
|    |
tttt [...]

The palette timer is how many frames to wait until the next instruction in the instruction list is proceeded to.

The ASM instructions are usually used for setting the initial colour index, which is an index into CGRAM equal to (p * 10h + c) * 2 where p is the palette number and c is the colour index within the palette.

Palette instructions are a mix of colours (which are positive values) and ASM instructions (negative values). Colours are written to successive positions in CGRAM starting from initial colour index. ASM instructions can modify the colour index between listed colour values, and the instruction $C595 is used to terminate the palette instruction list.

super/technical_information/data_structures.txt · Last modified: 2024/03/22 16:09 by p.jboy